Building the 2.6 kernel for the Epia SP8000E Board with Nemiah CPU
The very standard kernel from kernel.org, adding the vt1211-patch - as stated in the related links - and use the attached config.
For a Mandrake 10.1/10.2 System
config_2.6.13.EpiaN config_2.6.13.2.EpiaN
scsi and raid compiled in to get 2 S-ATA Drives running. Note that the longhaul module causes the system to crash, and using 2 SATA disks in mirror mode - makes it somewhat unstable. The VT8237 Chip seems to not like high load on the bus.
config_2.6.11.5-epiaN scsi and raid compiled into the kernel - as 2 S-ATA Drives running on it. No initrd required to boot. This kernel is much more stable when using the cfq scheduler then any other kernel. Under heavy traffic & High load though - crashes can still occure.
Entered by smurphy on Monday, 26 September 2005 @ 20:01:06
Linux on VIA Epia Hardware - Epia SP8000E, # Hits: 91205