This is most probably due to the fact that you're using the wrong Sampling speed. It avered to work correctly when using the alsa-Drivers 0.9.x with x > 4 and 1.0.x with x < 2- but you'll have to recompile these. Under Mandrake however - these will only compile if you deactivate the verbose-printk stuff.
In the Alsa-Driver directory, compile it using:
./configure --disable-verbose-printk && make && make install
or you'll get unresolved dependencies. Once this is done, make sure the alsa drivers are loaded using dxs_support=3. In the /etc/modules.conf - this will look like:
# Sound Stuff
above snd-via82xx snd-pcm-oss
alias sound-slot-0 snd-via82xx
options snd-via82xx dxs_support=3
And it should work :)
|
Entered by smurphy on Saturday, 18 August 2007 @ 23:57:58
|
Linux on VIA Epia Hardware - Epia M10000 / Hush, # Hits: 96387
|
[ 1,251 bytes - text/plain ]
|