The following beep codes have been found so far.
The beep codes were revised in October 1999,[2] and have been the same since. In addition, on some models, the power LED would flash in cadence.
- 1 beep = no RAM installed
- 2 beeps = incompatible RAM types
- 3 beeps = no good banks
- 4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
- 5 beeps = processor is not usable
|
Entered by smurphy on Monday, 06 October 2008 @ 12:02:57
|
Linux on Apple Hardware - Apple Mac-mini, # Hits: 87766
|