|
Model ManufacturerModel Manufacturer :
|
Self
|
|
Model typeType of the model, depending on propulsion and form. :
|
Quadrocopter
|
|
Model specialsSpecial designation of the model :
|
FPV Racing
|
|
Model sizeModel wingspan for planes, rotor-length for helicopters, and chassis width for
quadrocopters :
|
250 mm
|
|
Model weightWeight - ready to fly incl. Batteries :
|
440 g
|
|
First service dayFirst active service date :
|
2014-12-17
|
Comment on Model
Flight controller already provided by the GR-18 receiver.
No extra board required.
Used mainly for FPV Racing.
|
|
1 x Graupner Power Power Distribution Board (S8474) - 35x8x35mm / 27g [ Details | Web Link ]
|
|
1 x FXT VTX 5.8Ghz FPV System VTX (FXT-FPV-FX795T) - 31x20x8mm / 8g [ Details | Web Link ]
|
|
1 x Graupner OSD HoTT OSD (33641) - 42x20x8mm / 10g [ Details | Web Link ]
|
|
1 x Banggood Frame H250 ZMR250 Frame (SKU147479) - 250x250x50mm / 145g [ Details | Web Link ]
|
|
1 x FatShark Camera 700TVL CMOS FPV Camera V2 NTSC/PAL (HS1177) - 32x26x21mm / 15g [ Details | Web Link ]
|
|
4 x Flyduino ESC KISS ESC 2-4S 12A v1.2 (PR1864) - 24x12x4.5mm / 2g [ Details | Web Link ]
|
|
4 x Tiger Motor Engine T-Motor MN2204 2300kv (MN2204) - 27×16.5mm / 23g [ Details | Web Link ]
|
|
1 x Graupner Servo DES 281 BB MG (7905) - 21,5x21x11mm / 9g [ Details | Web Link ]
|
|
1 x Graupner Receiver GR-18+3xG+3A_Vario (33579) - 46x14x21mm / 14g [ Details | Web Link ]
|
|
4 x HobbyKing Nano-Tech LiPo 1300mAh 3S1P 45C - 72x23x35mm / 119g [ Details | Web Link ]
|
Blog content
| FPV Racer update | |
Posted by smurphy on Thursday, 18 June 2015 GMT
|
|
 As I was not very happy with my FPV Racer stability (and most racers would tell me - configure your PID's), I gave the firmware of the GR-18 Receiver (which has gyro, accel and air-pressure sensor) a try. I was using it in one of my airplanes, but all the auto-stabilization capability was unused.
And - I have to say - no configuration and it flies stable as nailed into the air. I never expected it to be so stable at all in the beginning.
Full size pictures can be seen here: Side View and Top down View
Note that the Video equipment was taken from the old Drone. I also managed to get some unbreakable props, and some 1.3Ah 45-90C LiPo batteries for that purpose. I added a Skyzone google for the FPV Racing which takes place nearly every second week-end with a couple friends.
A little video I made with the onboard Moebius Cam - but the site requires Flashplayer and has some limitations I don't like.
Second video on Youtube: common training session
Pictures from our last club-event:
Prep., In flight, In flight 2, in flight 3, recovery, 2 of us, Pilots, FPV View and in flight
Latest hardware setup stored in RC Models DB
|
|
 Back
|
Secured by phpPhobos
RSS Feed