Model ManufacturerModel Manufacturer :
|
Graupner
|
Model typeType of the model, depending on propulsion and form. :
|
Quadrocopter
|
Model specialsSpecial designation of the model :
|
Racecopter Alpha 250Q V2
|
Model sizeModel wingspan for planes, rotor-length for helicopters, and chassis width for quadrocopters :
|
250 mm
|
First service dayFirst active service date :
|
2016-09-23
|
Link to Manufacturer page:
|
www.graupner.dePopup: https://www.graupner.de/Racecopter-Alpha-250Q-Chassis-Bausatz-Set-V2/16520.V2SET/
|
Comment on Model
New racer. Usingf quite some nice equipment. Stays in the air around 1min longer than my other racers, due to more efficient engines.
The idea was to build a new drone using Graupner equipment to have the full telemetry available, and do some nice flights around our flying ground. With the used components, 3S and 4S battery packs can be used at will.
I even added some LED's at thee back powered by 5V eliminating the need for a power-up conversion from 5 to 12V.
|
1 x Graupner Power Power Distribution Board (S8474) - 35x8x35mm / 27g [ Details | Web Link ]
|
1 x Skyzon VTX TS5823 (TS5823) - 40x8x23mm / 8g [ Details | Web Link ]
|
1 x Graupner OSD HoTT OSD (33641) - 42x20x8mm / 10g [ Details | Web Link ]
|
1 x Graupner Frame Racecopter Alpha 250Q V2 (16520.V2SET) - 250x250x50mm / 145g [ Details | Web Link ]
|
2 x Sony Camera 600 tvl HS1177 PAL (HS1177) - 25X25mm / 12g [ Details | Web Link ]
|
1 x Graupner Telemetry GPS Alpha (S8437) - 30x30x16mm / 20g [ Details | Web Link ]
|
4 x BLHeli ESC DYS XM20A (206000066-0) - 23x12x4.5mmmm / 5g [ Details | Web Link ]
|
4 x DYS Engine SE2205CW (206000124-0) - 22x23mm / 31g [ Details | Web Link ]
|
1 x Graupner Receiver GR-18+3xG+3A_Vario (33579) - 46x14x21mm / 14g [ Details | Web Link ]
|
4 x HobbyKing Nano-Tech LiPo 1300mAh 4S1P 45C - 73x31x35mm / 155g [ Details | Web Link ]
|
Back
|